Winterizing your home is an important task for any vacant property. Whether the house is occupied only during the summer or if you’ve been away on vacation, winterizing your plumbing is crucial for preventing costly damage to your home during the colder months. The following article will cover the different steps involved in the winterizing process. You can also learn more about the importance of installing Carbon monoxide detectors and winterizing your heating system.
Before you begin winterizing the heating system in a vacant home, shut off the water at the street. Some systems have special draining methods, while others require the assistance of an HVAC professional. If you don’t have this knowledge, contact a professional to turn off the water. Signs should also be placed in conspicuous locations reminding you to turn off the heat. In any case, winterizing the heating system will prevent damages.
Seal windows. Seal windows with plastic cling wrap or other insulating material. If the windows are old, consider recaulking the frame to prevent air leakage. Also, make sure that all vents are closed and aren’t open, as this can drain the heating budget. Seal cracks and other holes to prevent air from entering. Close the doors and windows to prevent heat loss and air leakage.
One of the most common causes of property damage is frozen water pipes. Fortunately, freezing pipes are preventable. By properly winterizing your vacant home, you can prevent this. Before you leave town for the winter, turn off your water supply, open the lowest faucets, and wrap the pipes with insulation. Here are some easy steps to take:
If your house is plumbed on a downgrade, drain the pipes completely. This will minimize the risk of water expanding inside the pipes and bursting. If you are turning off the water, leave a trickle of water running through the pipes. This will help prevent freezing and breakage. This is especially important if you have children or animals living in the house. If there is a risk of freezing, a temperature alarm will alert you to a possible problem.
Carbon monoxide detectors
One of the most common causes of property damage is water, and the good news is that you can easily prevent this problem. Before winter sets in, take a few minutes to properly winterize the plumbing in your vacant home, especially the pipes. Unless you live in a climate with extremely cold winters, most water meters are located in the yard, near the sidewalk or street. While this is convenient, most people don’t feel comfortable turning off water at the street – so they call the utility company to turn the water off. Also, be sure to open all faucets on the property, especially the lowest ones.
Another way to winterize your drainage system is to use an air compressor. This will blow out any water that may be left inside the pipes. It’s also a good idea to take notes about any issues you find while inspecting your plumbing. You can even repair damaged plumbing, though it will be more difficult than a few minor problems. Make sure to take photos of any damages, including cracks or loose joints.
There are several reasons why you should winterize your plumbing in a vacant home. The cold winter weather can cause your pipes to freeze, which is costly. If you want to avoid this, follow these 7 simple instructions. Make sure that your thermostat is set to a comfortable level before winter arrives. You should also turn off your irrigation system and outdoor taps. Install a temperature alarm to prevent any unexpected problems with heating.
First, shut off water. Locate the main valve outside. If you have a well, you can use a breaker to shut the pump off. If you’re not sure where the valve is, you can turn the breaker to shut it off. Make sure the water lines are shut off as well, as leaving them open encourages leaks and burst pipes. Turn your thermostat to a higher temperature during the summer and lower it in winter. This prevents your pipes from freezing.
Water shutoff valves
How to winterize the plumbing in a vacant home is an important process to follow when you have a house that is unoccupied. If you fail to do so, it can result in flooding and property damage. To winterize your plumbing system, you need to shut off the water at the main shut-off valve. You can do this by turning it clockwise. This will prevent the water from flowing throughout the entire house.
To protect your pipes from freezing, you should shut off the water supply at the main valve. You should also drain the hose bibs and insulate them. Remember to turn off the shut-off valve so that they don’t freeze and break. Although heat tapes can help protect pipes from freezing, they come with additional risks. If you use these tapes, be sure to follow all instructions carefully, and follow the manufacturer’s directions.